Skip to main content
Tools / Energy / Gas Unit Converter

See the kWh equivalent of a gas meter reading, or reverse a supplier's kWh figure back into approximate m³. Use the default assumptions for a quick estimate or open the advanced settings to match the exact figures shown on your bill.

MJ/m³
Converted to kWh:
0 kWh
Formula used
m³ × calorific value × volume correction factor ÷ 3.6
Calorific value
39.5 MJ/m³
Volume correction factor
1.02264

Frequently Asked Questions

How do I convert m3 to kWh for a gas bill?
Enter the gas volume in cubic metres and the converter applies the standard UK billing formula using calorific value, a volume correction factor, and division by 3.6 to reach kWh. If your supplier has already done that step, switch the converter direction and work backwards instead.
Can I change the calorific value or volume correction factor?
Open advanced settings if your bill shows a different calorific value or correction factor and you want the conversion to match your supplier more closely.
What figures do most UK household bills use?
The volume correction factor is normally 1.02264. The calorific value varies, so suppliers bill using an average figure for your area and billing period. This converter starts with a representative default of 39.5 MJ/m³, but use the value printed on your bill if you want the closest match.
Will this work for an imperial gas meter?
This converter is for metric gas readings in cubic metres (m³). If your meter is marked in cubic feet or ft³, the result will not match directly. Use the kWh figure from your bill, or convert the imperial reading into cubic metres before using this tool.
Where can I estimate the full cost of my gas bill?
Use the Gas Bill Calculator if you want to turn gas usage into an estimated bill including unit rates, standing charges, and VAT.
Have you tried our Gas Bill Calculator?

Estimate your next gas bill from meter readings or direct kWh usage, plus your unit rate and standing charge.

Gas Bill Calculator